Floating Netting TrashTrap^®

The Floating Netting TrashTrap^® is a modular pontoon structure configured to accommodate one or more nets as required by the site-specific parameters of flow, velocity and floatables volume. The system is installed in the water facing the mouth of the outfall in a way that accommodate water level changes due to tides or flooding. Weighted side and funnel curtains made of heavy duty PVC coated polyester fabric direct the flow from the pipe into the mouth of the nets.

Rigid struts with flexible couplings can be used to hold the system in place while allowing for water level changes. Pontoons from the face of the bulkhead to the system can also be used.

There are several proven methods of attaching the system to the headwall of the outfall. Pilings with slides to allow the system to rise and fall with water level changes can be used to hold the system in place.

Units with anchoring cables have been used to handle up to 25 feet of water level change.

The system frame and support members are constructed of type 316 stainless or galvanized steel shapes, cut, welded to ASTM standards, and sized to withstand the loads imposed on the system by flow and wave, wind, or ice forces.

The flotation for the system is US Coast Guard Approved closed cell foam. It is located within the system to provide the buoyancy necessary for the desired freeboard and to keep the system level.

The top surface of the system is an industrial grade FRP non-skid safety grating, securely fastened to the unit with type 316 stainless steel hardware. This grating is hinged over the nets for servicing and is lockable.

Safety handrails with access gates to OSHA standards are provided when required.

Please Continue to our Specifications, Servicing and Installation page.